Walrus Audio Meraki Red Stereo Delay

Walrus Audio Meraki Red Stereo Delay, Effect Pedal, Hi-End stereo analogue delay, Uses 8x MN3005 chips for warm, rich echoes, Delay time from 80 ms to 1200 ms, Stereo or Mono usable, Delay Modes: Parallel, Ping-Pong, Series (serial), Independent setting of delay times for left and right channel, Independent setting of note values per channel: crotchet, quaver, dotted quaver, Provides both syncopated and classic delay sounds, Active tilt EQ for the effect signal, from bass-boost/hi-cut to high-boost/bass-cut, Adjustable waveforms for modulation: sine, square, random, Adjustable modulation phase for the right channel: 0º, 90º, 180º, Parallel delay mode: left and right channels operate independently of each other, Delay mode ping-pong: repetitions alternate between the channels, Delay Mode Series: syncopated rhythms, Delays of the left channel are mixed with the input of the right channel, Trails and no-trails mode: Effect fades out or effect stops immediately after deactivation, Tap tempo foot switch, Holding the tap tempo foot switch sets the feedback to maximum (oscillation), MIDI input, Expression controls the delay time or the modulation depth, Controls: Feedback L, Mix, Feedback R, Mod, Time, Tone, Switches: Div L, Feedback Path, Mod/Time, Div R, Footswitch: Effect Bypass, Tap/Osc, Input: 2 x 6.3 mm jack, Output: 2 x 6.3 mm jack, MIDI In: 1 x MIDI DIN, MIDI Thru: 1 x MIDI DIN, Tap/Exp input: 1x 6.3 mm jack, Power supply: Operation with 9V DC power supply (2.1 mm x 5.5 mm barrel connector, centre negative, available under Art. #409939# - not included, Power consumption: 500 mA, Dimensions: 12.7 x 14.6 x 5.7 cm, Made in USA ...